Product Overviews :

Factory product inspection standards

QUALITY

1. 0.85 above, the effective width of 140 cm; weight 580+-40 g/m2

2. pattern, color, feel, luminosity with guest

3. in no batch with color difference

4. feet thick, broad, trimming should agree

5. scratch-resistant, pay attention to the fabric, light and silhouettes color line, drag line, pollution

6. light fastness level 4, dry wet clean level 4, ISO105 standards

7. tear strength meridional and zonal, more than 20N

8. peel strength of warp and weft to, more than 20N

9. pattern groove white color consistent with the surface can be folded in half

10. wear-resisting martindale more than 20000 times

11. eather can not have a smell

PACKING

1. 25-40 m/roll, defect was put on red arrow point, at the same time also posted on both ends, with convenient volume head can see that the volume has several flaws and joint.

2. Tongue tube, packaging must pack tightly

3. Each volume joint cannot exceed 2 (3 pieces), each film is not less than 10 meters,lowed to have a joint, the minimum volumes may not be less than 20 m, and no more than 30%

4. Double transparent film, two head marks and out of the samples

5. Zero two head red tape to show distinction

6. Attach the shipping mark

We have the professional factory which use the advanced machine and mature technology. 

We control the quality strictly in each process. 

We have the professional inspection team to inspect the goods in each order.

 Quality control in production :

A . Before production, we will check the material with colors and features to make sure everything we are using on the mass production are strictly same as the sample shown.

B . We will be tracing every steps of the production from the beginning.

C . When item finished, QC checks.

D . Before packing, every items will be cleaned and checked.

E . Before loading, clients can send QC or point a third party to check the quality. we will try our best to help when problem occurs. 

FAQ

Related Products